Peloton Forum banner
1 - 2 of 2 Posts

·
Premium Member
Joined
·
586 Posts
Hi Chuck. Welcome and congrats your puchase!

Here are a couple of pics from my bike setup which was set up by the installers in my house. The cable is attached to the handlebars, then routed down between the top of the bottle holders then back up inside the bike above the wheel and inside the frame of the bike from there so it's no longer visible. If that's what yours looks like it's correct. If it's fully outside the bike it's not right.
Vehicle door Vehicle Ceiling


31
 

·
Premium Member
Joined
·
586 Posts
Great! Here's one more pic in case it helps. This is where the wires come down inside the frame and go into a hole on the right at which point they are inside the frame the rest of the way down.

Are you already a cyclist and/or spinner or new to it?

32
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top