Peloton Forum banner

Peloton Tread Specs

3048 Views 1 Reply 2 Participants Last post by  Sam
Full spec list of the Peloton Tread can be found here. All figures have been sourced directly from Peloton

  • Total: 72.5” L x 36.5” W x 72” H
  • Screen: 32” diagonal
  • Slat Belt: 67” L x 20” W
  • Step-up height: 11.5”
  • Total: 455 lb
  • Tread: 430 lb
  • Screen: 25 lb
  • Speed: 0-12.5 mph
  • Incline: 0-15% grade
  • Free Mode: Unpowered mode where user drives the slat belt
  • Motor: 2 HP AC
  • Screen Adjustment: 0-30 degrees vertical tilt
  • Safety: Removable safety key
  • Power Requirements: 120V, 60Hz, 15A dedicated circuit (U.S. only) (avoid GFCI outlets)
  • Platform: Carbon steel
  • Slat-belt: 59 individually mounted aluminum slats with rubber overmold, on ball bearing rail system
  • Handrail: Carbon steel and cast aluminum with soft‑touch coating
  • Tray: Polycarbonate with 2 water bottle holders
  • Accents: Nylon-blend performance fabric
  • 32” 1080p HD touchscreen
User Controls:
  • One-touch wake/stop/sleep button
  • Speed and Incline knobs with jump buttons
  • One-touch Free Mode button
  • Front-facing Volume up/down buttons
  • 20 W soundbar with 70Hz to 20KHz frequency response
  • Digital signal processing system for enhanced bass response, voice clarity and overall loudness
  • USB charging for wireless headphones
  • 3.5 mm jack for wired headphones
  • Bluetooth audio-ready for external devices
  • WiFi 802.11 a/b/g/n/ac, MIMO 2x2 Antenna
  • ANT+
  • Bluetooth
  • 100 Mbps Ethernet

  • 5 megapixel front‑facing
See less See more
1 - 2 of 2 Posts
Typical condo dewllers will find it hard to fit the treadmill in. Even if you have the space, that space will be dedicated to it 24/7 due to its inability to fold. Folding treadmills take priority.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.