[specialk79]

Movers misplaced tread hardware when we moved so need all the bolts screws etc that get my rails and frame attached to the tread base including the monitor.

peloton said they looking into it but wanted to see if anyone has any experience with this?

 

[Beachbum2021]

Movers misplaced tread hardware when we moved so need all the bolts screws etc that get my rails and frame attached to the tread base including the monitor.

peloton said they looking into it but wanted to see if anyone has any experience with this?

I know this is an old post, but how did you resolve your missing hardware issue? Did Peloton finally respond and provide what you needed? I wonder if there’s a parts diagram that provides all of the parts and components detail. Would be nice to get a hold of a service manual for the Tread+ and Bike+. If anyone has a link or PDFs, please provide. Thx!

 

[dtom79]

I had a similar issue and so I figured out the bolts. The upright bolts (where the uprights attach to the base) are: M10x1.5mm x 16mm length. They are button head socket screws (an M8 allen key to tighten/loosen). You can buy them on McMaster Carr, just search part number 91290A512. They are black oxide (same finish as bolts you get from peloton).

cheers...hope this helps someone out there.

 

[Mccarragheb1]

I had a similar issue and so I figured out the bolts. The upright bolts (where the uprights attach to the base) are: M10x1.5mm x 16mm length. They are button head socket screws (an M8 allen key to tighten/loosen). You can buy them on McMaster Carr, just search part number 91290A512. They are black oxide (same finish as bolts you get from peloton).

cheers...hope this helps someone out there.

Thank you very helpful. Do you happen to know the screw size for the hand rail?